Shanghai Sihao Machinery Equipment Co., Ltd.

1.Put the card in the card frame and fix it.

2.Move the frame and choose the position what you need.

3.Write the daisy characters plate,use the pointer to choose the characters you need.

4.After doing step 1~3,jolt the hand-haft.

5.If the embossment depth is out fit what you need,you can adjust the bolt in adjusting hole at the bottom of machine.You can use 4th inner hexagon spanner to untie the bolt,and then use 8th outer hexagon spanner to untie outer bolt,after adjusting,please screw the bolt.

6.There are 2 different spacing for large or small fonts,1/7 or 1/10.

1.Please use the PVC card(85mm x 55mm) CR-80 standard.

2.When turning the characters plate,please don't drop down the hand-haft.

3.When switch the embossment size, please ward off the card frame slightly to avoid damage.

4.Never put hand or other hard objects into the machine.

5.Please move the card frame to the left end when not using the machine .

6.If the imprinted character may be deeper or shallower,undesirable,then it can be adjusted by adjusting screw in the regulation.

Attention:turning the regulating screw in clockwise may deepen the typed characters while clockwise turning may lighten the typed characters.After finishing,please use the inside-hexagonal spanner with the code sprinter to make the regulating srcew stable,and then use the Z outside-hexagonal spanner to fasten the hold-downscrew.

Kindly Notice: Due to the effort saving design, please do not pull the lever too hard during your operation in order to protect the machine.


68 - Character Manual Embossing Printer Credit Card/ID/VIP/PVC Embosser Machine
Features:
 

• Manual PVC Card Embossing Machine
• Adopting ISO international credit card special character.
• Indicator and Sample Card For Raised Type Location Indication
• Adjustable Kerning,7,10 Characters Per Inch and 11 Lines of Embossing
• Internal 68 Code Characters, Adopting ISO International Credit Card Special Characters, Meets All Your Needs
• Heavy Duty Steel Construction
• Easy to Use with No Skilled Training Required, Just Turn the dial to the Character you Want and Pull the Lever
• 2 Correcting Characters For Error Correction, to Press Small Characters or Large Characters Flat
• Character depth can be adjusted to users specifications by adjusting portion located towards the bottom of the machine (Hardware is included.)
• 2 Years Free Warranty

68 - Character Manual Embossing Printer Credit Card/ID/VIP/PVC Embosser Machine
Technical infomation :
 

1. Applies workpiece:Normative PVC card, That be 85.5mm × 55mm
2. Character-selection:Character rosette turn plate
3. English letters capital English letters(26):A~Z
4. Capitalization & Lower Arabic numerals (20):0~9
5. Small symbols (8):&‵ ,. - / ( )
6. Large symbols (12):£ $ ¥ N O .-( )
7. Modify planishing symbols(2): 
8. 2 gears for word spacing gap:1/7 inch,1/10 inch(only for small characters)
9. Operation mode:Manual
10. Raised type lines:1-11 lines
11. Raised type location indication:Indicator or sample card
12. Volume(L×D×H):340×300×180 (mm)
13. Net weight of the machine:8.8 kg

68 - Character Manual Embossing Printer Credit Card/ID/VIP/PVC Embosser Machine
Package :

1 x PVC Card Embossing Machine
1 x Punch Handle
1 x Sample PVC Card
1 x Set of Hardware
1 x User's Manual



Appliance:



CONTACT US :
 

Vevor Machinery Equipment Co., Ltd     
Add.:Floor 2,#10 No.11 ,Lianxi Rd.,Huangdu town Jiading district ,Shanghai ,China  

TEL:86-(0)21-59556926 Fax: 86-(0)21-59556926

Mobile:0086 15921364029

 
URL :http://www.vevor.com